PLUS+1 User Forum

PLUS+1 Software => Telematics => Topic started by: Nikkin on July 22, 2026, 09:25:24 PM

Title: CS10 - M2M - hide Functions?
Post by: Nikkin on July 22, 2026, 09:25:24 PM

Hello everyone!

I need your help configuring CS10.

I'm trying to connect four CS10"Station" units to a CS10 "access point" and receive messages at CAN0 port. Likewise, I need messages present on the CAN0 bus to be retransmitted to the Station modules. I have managed to do this, but only with two modules. Although the M2M protocol specifies a connection of only two, I would like to know if anyone has managed to do this and how.

I would be very grateful for any help.

Thanks a lot
Nikkin :)

Title: Re: CS10 - M2M - hide Functions?
Post by: Lukey on July 23, 2026, 02:36:43 AM

The hardware cannot work like you described, as you mentioned only two device can connect to each other,, it's doesn't work like a broadcasting  master and slave/s.