PLUS+1 User Forum
PLUS+1 Software => Communication => Topic started by: bgtwuk on November 21, 2015, 11:34:10 PM
-
Hi all.
Has anyone had experience writing can to a TECO drive to control all parameters?
Coulkd use some pointers.
Bgtwuk
-
Hello,
I have no experience with the TECO drive, but if it supports CANopen, it is easy to configure the Parameters on the TECO drive with a Plus+1 Controller or Display by using the right Messages and the Tx/Rx blocks in Guide.
KR,
Florian