PLUS+1 User Forum

PLUS+1 Tools => PLUS+1 Service Tool => Topic started by: jlbantz3fa on June 13, 2018, 05:21:11 PM

Title: WS Telematics/Wireless Drivers Version 1.1.x?
Post by: jlbantz3fa on June 13, 2018, 05:21:11 PM
I have upgraded my Service Tool installation to 10.1.6 Professional. Since the upgrade from 10.0.x, I have lost the ability to use the WS Telematics connectivity. The release notes states:

[F00385] Feature: WS Telematics/Wireless gateway password support
- Possible to set a gateway password in Service Application properties.
- Password is used when connecting to Danfoss WS devices (no password needed for devices
with default configuration).
- Note: Version 1.1.x or later is required for WS Telematics/Wireless drivers.

Are new drivers available out there for 10.1.x? If so, where can I find them; most of the old links to request these types of downloads no longer works.
Title: Re: WS Telematics/Wireless Drivers Version 1.1.x?
Post by: Nilla on June 14, 2018, 02:15:52 PM
Hi jlbantz3fa!

We realize the latest update of our website might not have made some information easier to find and we at PLUS+1 Helpdesk are sorry for this!

Here is where you find the latest drivers for Telematics;
https://www.danfoss.com/en/markets/mobile-hydraulics/dps/connected-solutions/#overview   (expand the Download section)

Here is where you find 3D models, Default configuration and request firmware per hardware;
https://www.danfoss.com/en/products/electronic-controls/dps/telematics/#product-range

In a near future we hope to include also Telematics drivers, tools and firmware into PLUS+1 Update center!

Best regards
Nilla
PLUS+1 Helpdesk team
Title: Re: WS Telematics/Wireless Drivers Version 1.1.x?
Post by: jlbantz3fa on June 14, 2018, 09:27:59 PM
Thanks for the help!