Author Topic: Save Value after Power Off--Old Hardware  (Read 6268 times)

Paldin

  • Guest
Save Value after Power Off--Old Hardware
« on: August 23, 2013, 08:10:48 PM »
We're trying to make a program remember a value after power is turned off and on again (see attached screen shot).  Using Old Hardware in DP600 screen.  Do NOT want to re-write entire complicated program in new hardware.  Current program resets the value to zero when power is cycled.  Value does go from "0" to "1" while machine is running and verified this with Service tool.  What Old Hardware functions will allow storing this "Non-Volatile Memory Input/Output" after power down?  Entire program also attached--problem area is in "App" - "Faults" - "Blower Faults" page.
Thanks,
Alan