PLUS+1 User Forum
General Discussion => Functional Safety and PLUS+1 => Topic started by: Thomas on February 01, 2013, 11:27:38 AM
-
Hi All!
We are currently developing a Functional Safety Training for our customers.
We have ideas to what to include in a training but I am interested in to know what you would like to see in such a training to meet your expectations?
Your feedback is very valuable as this training will be designed to meet your needs.
Sorry for being a bit vague in my the description of the course but I do not want to limit your ideas what you would like to see.
Looking forward to your feedback // Thomas
-
Hi Thomas,
I would personnally like to see everything! Legal requirements, how to design a safe system, hardware requirements, sensor requirements, software design, general good practices, CAN bus design etc etc...and the reasons to use Plus+1 over the competition. (I am not suggesting there are none, I simply would need to 'sell' it).
Regards Richard
-
Hi Richard!
Thanks for your feedback, much appreciated.
Our goal is to provide a good overview and more in-depth information when possible. During a training like this it is not possible to penetrate every topic due to time limitations but we are right now working on an agenda where we do a mix of overview and in-depth. The topic is for the training is a really wide with a lot of information to be shared.
I'll keep posting information regarding the training in this thread.
Best regards // Thomas
-
Hello Thomas,
would it be on-line or class?
Thanks,
-
Hi!
It will be a face to face training. The topic is rather complex and face to face is a more effective learning.
Thomas
-
Hello Thomas,
would the training be in Älmhult? I´m very interested in such trainings. Will there be a chapter about the mechanical requirements (valves and may be some kind of mechanical locks for moving parts) of a machine?
Greetings
Gregor
-
Hi Gregor!
Thanks for asking. We are still quite early in the development of the course. I can reveal that it will be 3 different courses in total.
- One more basic with overviews designed for everyone, account managers, system developers and programmers.
- Next step will focus on hazard and risk analysis.
- The last step will focus on software development and processes around it.
We will present the courses layout at Bauma in April, hope you can wait until then. I will keep posting information here so keep asking, input is important for us.
Thanks // Thomas
-
Sign me up. I can see this as a VERY important topic.
-
That looks like a good layout Thomas. I would like to learn how I can use and program the S-D safe controllers to keep compliance with the common safety standards and also how I can integrate it with current Plus1 compliant components with it's ability to perform EDM and other system checks.
Since many people will be flying to get to a training facility it would be nice if all three courses could be attended in a row for those that want to attend all of them.
There's my 2 cents. :)
Do you have any general sense of when this training will be available?
-
Thanks for your feedback, much appreciated!
Unfortunately the 3 courses will be 2 days each, it was impossible to squeeze in all necessary information in one day.
We will release the trainings at Bauma and that is in mid April.
I will continue to post more information in this topic.
Hope to see you soon in a classroom near you // Thomas
-
Dear PLUS+1 users!
You are the first to be informed of the content of our brand new training program for functional Safety. :)
We will share this information at Bauma next week.
- Functional Safety Fundamentals
- Risk Assessment and Safety Function Evaluation
- Safety Related Software Development
Attached you can also find our training flyers.
We are working hard to present a training schedule as soon as possible. I'll keep posting information here when I know more.
Don't hesitate to post questions here I'll answer as soon as possible.
See you at Bauma // Thomas
-
Are there any training classes scheduled in the US yet? This is a very important subject to me.
-
Hi Tjozmin!
We are working on a training schedule for North America, best way to find more information is at our website and in Horizon where you can sign up to the training class.
Website:
http://powersolutions.danfoss.com/Applications/FunctionalSafety/index.htm (http://powersolutions.danfoss.com/Applications/FunctionalSafety/index.htm)
Horizon: (Training Schedule and sign up)
http://powersolutions.danfoss.com/Products/MobileElectronics/PLUS1Guide/PLUS1GuideSupport/PLUS1Training/index.htm (http://powersolutions.danfoss.com/Products/MobileElectronics/PLUS1Guide/PLUS1GuideSupport/PLUS1Training/index.htm)
I will post more information when I know more about the training schedule.
Thanks for asking // Thomas