PLUS+1 User Forum

PLUS+1 Software => Telematics => Topic started by: spittet on April 12, 2015, 03:51:54 AM

Title: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: spittet on April 12, 2015, 03:51:54 AM
Hi,

I downloaded the "Danfoss Telematics Solution PLUS1 Service Tool Drivers" to be able to do a remote connection with a WS403 unit and I can't connect because the Network Validation cannot open ports 443 and 60100.

I tried to do some port forwarding with our IT guy and we also make sure that there are no firewall activated and we always get the "The required ports (443 & 60100) are not open. Check the Internet connection." We even tried a DMZ to forward all the external requests to my computer local IP and the ports were still closed.

What are the next steps? The WS403 user manual doesn't have this type of info.

Thanks!

Sam
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: ssutherington on April 12, 2015, 03:33:13 PM
The portal is down for maintenance this weekend. Try again once it is up and running.

You can check it's status at the link below.

https://danfoss.proemion.com/portal/
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: spittet on April 15, 2015, 06:09:10 PM
Ok, now at least, I can login and I can see my remote machines in the window. But when I try to connect to a machine, I get error 24 : Device password request time out. Most likely because device is offline.

I know the machine is not offline because I can see it online in the Machine Window.

Maybe the timeout delay is too short. Can it be increased?

Still, the port check tell me that my port 60100 is closed. How can I open it. I already forwarded the 60100 port to my computer IP address. I have remove all my firewalls on  my computer. What else can I do?

Sam
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: Thomas on April 15, 2015, 08:10:30 PM
Hello Spittet!

I have asked helpdesk to contact to you directly resolve this.

Best regards // Thomas
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: spittet on May 25, 2015, 09:59:58 PM
Hi,

Any news on this? I saw that a new ticket has been created, but I don't have any news since then.

Let me know!

Thanks!

Sam
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: Thomas on May 26, 2015, 08:21:20 AM
Hello!

I have asked helpdesk to follow up. Think we had a miss in our internal communication. Sorry for the delay.

Best regards // Thomas
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: spittet on July 01, 2015, 07:25:21 PM
Hi again, no news on this one. Please let me know.

Sam
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: Andy on July 02, 2015, 11:09:21 AM
Have you tried the latest driver?

http://powersolutions.danfoss.com/solutions/telematics/
Title: Re: How to open ports 443 and 60100 (WS Danfoss Telematics)
Post by: spittet on July 10, 2015, 08:01:31 PM
Hi everyone,

I'm pleased to announce that this problem is now solved.

Helpdesk suggested that I use the latest driver (10.11), the latest Service Tool (7.1.12) and the latest WS403 firmware (11.00j).

It's now working as it should. I'm able to connect with the WS403, download programs remotely to Danfoss controllers, log some checkpoints, change parameters, etc.

Really nice product. It will be nice for remote troubleshooting/tuning.

Thanks again PLUS1 Support!

Sam