Author Topic: Functional Safety Training!  (Read 15711 times)

Thomas

  • Guest
Functional Safety Training!
« on: February 01, 2013, 11:27:38 AM »
Hi All!

We are currently developing a Functional Safety Training for our customers.

We have ideas to what to include in a training but I am interested in to know what you would like to see in such a training to meet your expectations?
Your feedback is very valuable as this training will be designed to meet your needs.

Sorry for being a bit vague in my the description of the course but I do not want to limit your ideas what you would like to see.

Looking forward to your feedback // Thomas

Offline Richard

  • PLUS+1 Expert
  • ****
  • Posts: 64
  • Karma: +2/-0
    • Textron
Re: Functional Safety Training!
« Reply #1 on: February 04, 2013, 02:21:13 PM »
Hi Thomas,

I would personnally like to see everything!  Legal requirements, how to design a safe system, hardware requirements, sensor requirements, software design, general good practices, CAN bus design etc etc...and the reasons to use Plus+1 over the competition.  (I am not suggesting there are none, I simply would need to 'sell' it).

Regards Richard

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #2 on: February 08, 2013, 08:09:57 AM »
Hi Richard!

Thanks for your feedback, much appreciated.

Our goal is to provide a good overview and more in-depth information when possible. During a training like this it is not possible to penetrate every topic due to time limitations but we are right now working on an agenda where we do a mix of overview and in-depth. The topic is for the training is a really wide with a lot of information to be shared.

I'll keep posting information regarding the training in this thread.

Best regards // Thomas

Cristian

  • Guest
Re: Functional Safety Training!
« Reply #3 on: February 08, 2013, 10:08:34 AM »
Hello Thomas,

would it be on-line or class?

Thanks,

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #4 on: February 08, 2013, 10:33:16 AM »
Hi!

It will be a face to face training. The topic is rather complex and face to face is a more effective learning.

Thomas

Gregor

  • Guest
Re: Functional Safety Training!
« Reply #5 on: February 25, 2013, 08:28:53 AM »
Hello Thomas,

would the training be in Älmhult? I´m very interested in such trainings. Will there be a chapter about the mechanical requirements (valves and may be some kind of mechanical locks for moving parts) of a machine?

Greetings
Gregor

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #6 on: February 25, 2013, 10:05:15 AM »
Hi Gregor!

Thanks for asking. We are still quite early in the development of the course. I can reveal that it will be 3 different courses in total.

- One more basic with overviews designed for everyone, account managers, system developers and programmers.
- Next step will focus on hazard and risk analysis.
- The last step will focus on software development and processes around it.

We will present the courses layout at Bauma in April, hope you can wait until then. I will keep posting information here so keep asking, input is important for us.

Thanks // Thomas 

Offline dlewis

  • PLUS+1 Guru
  • *****
  • Posts: 102
  • Karma: +2/-0
    • Getman Corporation
Re: Functional Safety Training!
« Reply #7 on: February 25, 2013, 01:27:37 PM »
Sign me up.  I can see this as a VERY important topic.

Offline turboshad

  • PLUS+1 Developer
  • ***
  • Posts: 14
  • Karma: +3/-0
Re: Functional Safety Training!
« Reply #8 on: March 21, 2013, 06:28:47 PM »
That looks like a good layout Thomas. I would like to learn how I can use and program the S-D safe controllers to keep compliance with the common safety standards and also how I can integrate it with current Plus1 compliant components with it's ability to perform EDM and other system checks.

Since many people will be flying to get to a training facility it would be nice if all three courses could be attended in a row for those that want to attend all of them.

There's my 2 cents. :)

Do you have any general sense of when this training will be available?

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #9 on: March 22, 2013, 07:50:59 AM »
Thanks for your feedback, much appreciated!

Unfortunately the 3 courses will be 2 days each, it was impossible to squeeze in all necessary information in one day. 

We will release the trainings at Bauma and that is in mid April.

I will continue to post more information in this topic.

Hope to see you soon in a classroom near you // Thomas

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #10 on: April 12, 2013, 02:23:57 PM »
Dear PLUS+1 users!

You are the first to be informed of the content of our brand new training program for functional Safety.   :)
We will share this information at Bauma next week.

- Functional Safety Fundamentals
- Risk Assessment and Safety Function Evaluation
- Safety Related Software Development

Attached you can also find our training flyers.
We are working hard to present a training schedule as soon as possible. I'll keep posting information here when I know more.

Don't hesitate to post questions here I'll answer as soon as possible.

See you at Bauma // Thomas

Offline tjozmin

  • PLUS+1 Developer
  • ***
  • Posts: 10
  • Karma: +0/-0
    • Oxbo International Corporation
Re: Functional Safety Training!
« Reply #11 on: September 30, 2013, 01:38:58 PM »
Are there any training classes scheduled in the US yet? This is a very important subject to me.

Thomas

  • Guest
Re: Functional Safety Training!
« Reply #12 on: October 03, 2013, 01:53:16 PM »
Hi Tjozmin!

We are working on a training schedule for North America, best way to find more information is at our website and in Horizon where you can sign up to the training class.

Website:
http://powersolutions.danfoss.com/Applications/FunctionalSafety/index.htm
Horizon: (Training Schedule and sign up)
http://powersolutions.danfoss.com/Products/MobileElectronics/PLUS1Guide/PLUS1GuideSupport/PLUS1Training/index.htm

I will post more information when I know more about the training schedule.

Thanks for asking // Thomas