Recent Posts

Pages: 1 ... 5 6 [7] 8 9 10
61
PLUS+1 Service Tool / Re: WARNING! Service Tool 2022.3.7
« Last post by Fredrick on December 12, 2022, 08:51:10 PM »
Thanks, now it works well.
The new ServiceTool also appears faster then 2022.2, specially when it comes to downloading parameters.
62
Hello ElecHydEng

A guess is that you have some PLC Units left in the project manager.  See image.

If you know you are not using any them, you can delete it all. 
DO A BACKUP BEFORE DELETING ANYTHING.  Just in case.

You might also delete the C Code part. I missed marking it.


I hope it helps.
63
Gents,

Can someone please help with the compilation Failure am getting relating to Fault Error446:1077.

*** ERROR 446:1077 *** [PLC2C] PLC Code Compilation Failure {Function block instance 'GetSPNName' is not defined, and there is no function by that name.}
Line: [ 29 ] in implementation of PrintSPNName



not sure what going on, i have pretty much deleted the whole program and tried to compile again its still gives the same error.


can someone help please happy to pay for the service.


Regards,
H.A
64
PLUS+1 Autonomy Hardware / Re: NMEA 2000
« Last post by FluidPowerTom on December 09, 2022, 05:27:07 PM »
Agreed.  NMEA 2000 appears to be standard on RTK GPS transceivers that I've looked into such as Trimble.  That said, the Trimble dealer that I spoke with indicated that they can customize their offering to send us whatever data we need via whatever CAN format we want such as J1939 prop B.
65
PLUS+1 Autonomy Hardware / NMEA 2000
« Last post by F.M.Elettromeccanica on December 09, 2022, 11:58:24 AM »
Hi all, is there any library to decode NMEA2000 PGN 129029 to reach Latitude and Longitude data? No released and no beta? I thing it will be difficult to use Autonomous FB if no NMEA Library is released.
Thanks in advance
66
PLUS+1 GUIDE / Re: Hoe does DIV handle the remainder?
« Last post by BBarry on December 08, 2022, 09:46:14 PM »
Thanks! That is exactly what I was looking for.
67
PLUS+1 GUIDE / Re: Hoe does DIV handle the remainder?
« Last post by niteRider on December 08, 2022, 03:50:20 PM »
You can use the Modulo component to extract the remainder, too.
68
PLUS+1 GUIDE / Re: Hoe does DIV handle the remainder?
« Last post by Tor on December 08, 2022, 09:02:46 AM »
Hello BBarry,

If you get a decimal number with the regular DIV component, it is truncated to zero decimal digits.  9/2=4  (Not stated/explained in the User Manual).
Then you have the Rounded divide that rounds up or down depending on what the reminder is. 9/2=5 (This is stated/explained in the User Manual).


I hope it helps.
69
PLUS+1 GUIDE / Hoe does DIV handle the remainder?
« Last post by BBarry on December 07, 2022, 10:41:34 PM »
Hi guys this may be a very basic question. I searched and could not find it spelled out anywhere.

How does the DIV function handle remainders (truncate it?) aka always round down to the nearest whole number?
I want to always round a number down and if DIV can do it for me great.

Warmest regards,
70
PLUS+1 CS Hardware / Re: Update CS10 Hdw file
« Last post by Tor on December 07, 2022, 11:05:39 AM »
Hello,

I'm not an CS expert, so don't quote me on this.

When you change the HWD in a CS product, you also replace the LINUX OS, like in the DM1x00. If you use the CG150 as gateway it will take time. A long time.
You should be able to use WiFi, which is faster (nothing I have done myself, but I heard it takes around 2 minutes).
I'm not sure what happens after the update, if you just can connect with WiFi again or if you need to connect with CG150 and change some settings??
 

Here's a video about the CS10 and WiFi connection: https://youtu.be/fV2DmM28Pro

Have a nice day.


Pages: 1 ... 5 6 [7] 8 9 10