PLUS+1 User Forum

PLUS+1 Software => General controls => Topic started by: Cranes on January 30, 2013, 12:28:46 AM

Title: PLUS1 Programming Coming from C (for beginners)
Post by: Cranes on January 30, 2013, 12:28:46 AM
What's the best method of learning to program Plus1? Translating If, Then, Else into the available component blocks doesn't always appear to be clear. Are there any sources that take programming code and show the equivalent in component objects?

Thanks,
Jeff
Title: Re: PLUS1 Programming Coming from C (for beginners)
Post by: Thomas on January 30, 2013, 08:37:34 AM
Hi Jeff!

On our website you can find our free on-line training to get started.
http://www.sauer-danfoss.com/Products/MobileElectronics/PLUS1Guide/PLUS1GuideSupport/PLUS1Training/index.htm (http://www.sauer-danfoss.com/Products/MobileElectronics/PLUS1Guide/PLUS1GuideSupport/PLUS1Training/index.htm)
Here  you can also find our face to face training sessions in Minneapolis US and in Älmhult Sweden.

My recommendation is to start with the e-learning and then join one of our face to face training classes.
This can of course be different depending on individual background.

Hope you can find a good introduction to PLUS+1 GUIDE // Thomas