PLUS+1 User Forum

PLUS+1 Hardware => Displays => Topic started by: pinias on June 19, 2018, 11:35:17 PM

Title: DP610 LED CODES
Post by: pinias on June 19, 2018, 11:35:17 PM

Does any one have the possible red LED codes from facotry of the DP600 series ?

I do remember have seen a document explaining why the red LED on the Dp610 will lit up, from factory settings.

I just cannot find it out

Title: Re: DP610 LED CODES
Post by: Nilla on June 21, 2018, 11:39:22 AM
Hi Pinias!

The LED of a DP6xx straight from production flashes when any of the CAN busses are in BusOff state. During BusOff the LED will blink with 1Hz (on 200ms, off 800ms). As found in the template.

You are able to change these settings in your application and if you do, as soon as you download your own application with your settings of the LED this behaviour will change.

Best regards
PLUS+1 Helpdesk team