PLUS+1 User Forum

PLUS+1 Tools => PLUS+1 GUIDE CANKing => Topic started by: Marbek_Elektronik on February 20, 2015, 09:53:08 AM

Title: How to play a recorded file?
Post by: Marbek_Elektronik on February 20, 2015, 09:53:08 AM
Hi,
I have logged CAN data to a text file.
But how to play this file back to can bus?
Can anybody help?
Thanks,
Bernd
Title: Re: How to play a recorded file?
Post by: Marbek_Elektronik on February 20, 2015, 10:40:27 AM
I have found it in "View HistoryList/ Load *.txt"
Title: Re: How to play a recorded file?
Post by: Jakob on February 20, 2015, 11:03:09 AM
Nice :)
I was wondering if the historylist function could do this.
Title: Re: How to play a recorded file?
Post by: hgb1992 on March 11, 2015, 11:59:32 AM
Hello!

Did the function "view history list/load" solve your Problem? Such a function would be very interessting for me too!

Thanks in advance for your Feedback.

KR, Benedikt
Title: Re: How to play a recorded file?
Post by: Marbek_Elektronik on March 11, 2015, 03:40:59 PM
it is very tricky to use:

At the time, it works only if I use the Kvaser CANKing (installed Danfoss CANKing parallel, because of drivers),
and in second: work with Dez-formatters, not with Hex-formatters!
In Window "Select Formatters" click on "options" and select "Dezimal"

Perhaps it works better, if you use original Kvaser software and an Kvaser gateway?
Title: Re: How to play a recorded file?
Post by: SunnyMan on December 02, 2015, 04:28:20 PM
Hi to all,

I found a X-Analyzer3 software few days ago... I am satisfied of features of this soft so much, even it can to playback a log.

Now the ECO version of this soft is free of charge, just to buy one Kvaser Leaf Light 2.0 interface.

http://www.xanalyser.com/xanalyser3/videos/

MJ