PLUS+1 User Forum

PLUS+1™ Software => General controls => Topic started by: Brant on October 18, 2012, 08:57:43 AM

Title: PVE-P
Post by: Brant on October 18, 2012, 08:57:43 AM
Hi everybody,
Does anybody experienced problems with PVEP coils?
The spool is continuously moving (+/- 50%) with a constant setpoint.
The feedback indicated that the duty cycle is Ok and a similar value as setpoint.

If we use the manual lever instead of a setpoint from the ECU, the flow is continous, about +/-5%.
So manually it is correct, but not with electric setpoint!

May be somebody to help us?

We are going to try the special PVEP function block.

Title: Re: PVE-P
Post by: hproffitt on October 18, 2012, 02:28:05 PM
My mistake.  PVEP is the PWM control.  I originally gave you the voltage coil info.
Title: Re: PVE-P
Post by: Neil on October 18, 2012, 10:03:57 PM

PVEP characteristics are shown below, I would try pinconfig3.