PLUS+1 User Forum

PLUS+1 Hardware => Displays => Topic started by: pgrosshart on October 18, 2011, 01:06:02 AM

Title: Communication error
Post by: pgrosshart on October 18, 2011, 01:06:02 AM
I new... the CG150 can't find the DP200 attached, does it need a termination resistor to work?
Title: Re: Communication error
Post by: bgtwuk on October 18, 2011, 03:11:30 AM
Often, Yes.

It is beat to add to your breakout cable that you use to power up the module.

Good luck.
Title: Re: Communication error
Post by: pinias on March 30, 2012, 03:48:27 AM
you may have solved it by now,

but you need to create your CAN bus line if working only with the DP200 and your laptop. the termination resistor used to be added when working with a machineĀ“s ECU and the DP 200.

Regards